Field of use: high temperatures  working environments
Quality norm: STAS 2077/2/1979
Textile: EP insertion types EP 125; EP 200; EP 250; EP 315; EP 400.
Conveyor width: between 400 and 1600 mm 1%
Conveyor thickness:

• dimensional tolerances :
• thickness between 8 to 10 mm, 1 mm.
• thickness over 10 mm, 10 %.

Rubber layer thickness:

• for thickness up to 4 mm, +1 mm/-0,2 mm
• for thickness over  4 mm, + 1 mm/-0,5%

Conveyor length:

• maxim 300 m,  +2%/-5%

Moulded edge width:

• max. 15 mm

Number of EP insertions

• Between 2-6  plies

Mechanical and physical characteristics of the rubber  layer:

Crt	Characteristics	Conditions of eligibility
1	Tensile strenght; min	20 (200)
2	Elongation at break; min	400
3	Abrasion resistance ; max	200
4	Resistance to accelarated aging oven ( 168 h X 70oC) - variation of resistance ; max - variation of elongation ; max	25 25

Conveyor belt characteristics:

Crt	Characteristics	U.M.	Imposed value
1	Class resitance [Rr] min/nr. of plies - conveyor types with 2 plies , commonly used - conveyor types with more than 2 plies , commonly used	(daN/cm)/ nr.ins	- 250/2; 315/2; 400/2; 500/2; 630/2; 800/2 - 315/3; 400/3; 630/4; 800/4; 1000/5; 1250/5; 1600/5; 2000/5
2	Elongation under load reference , max	%	4
3	Adhesion between plies; min	daN/cm	6
4	Adhesion between plies and rubber layer, min	daN/cm	6